Clean fasteners are critical for trouble-free assembly, plating, and coating. Superclean 150 is an alkaline degreasing chemical developed specifically for stainless steel fasteners and precision components. It targets oil, drawing compounds, and metallic dust that standard cleaners leave behind.
The formulation reaches deep into threads, under heads, and other hard-to-reach areas. It breaks down the oily film and lifts metallic deposits, so every part comes out clean and ready for the next stage.
Why leading fastener manufacturers rely on Superclean 150 in their cleaning lines:
Cleans threads, recesses, and under-head zones where oil and metallic fines tend to pack in.
Breaks the oily layer and loosens embedded metallic deposits for a truly clean metal surface.
Delivers fast degreasing, helping you shorten cleaning cycles and reduce line downtime.
Performs reliably in ultrasonic and tumbling systems used for bulk S.S. fasteners.
Water-based and biodegradable, supporting safer, cleaner, and more sustainable operations.
Use these operating ranges to get consistent, repeatable cleaning performance with Superclean 150.
|
Parameter |
Recommendation |
|
Concentration mix |
Use 5–10% Superclean 150 in water, mixed thoroughly until uniform. |
|
Temperature |
Maintain bath temperature between 60°C and 70°C for optimal degreasing. |
|
Soak time |
Immerse components for 10–15 minutes, depending on soil level and part geometry. |
|
Method |
Use tumbling or agitation for best cleaning in mass-fastener loads. |
| Post-process | Rinse thoroughly with water and allow parts to air dry or blow dry. |
Pro tip: For heavily soiled fasteners or dense bulk loads, keep the bath stable in the 60–70°C range and stay at the higher end of the concentration band to unlock full cleaning power.
Get In Touch With Us Smart Chemistry
ELITE AQUACHEM is one of the leading companies in the field of speciality chemicals catering the requirements of different industries. The company is managed by a team having vast experience.
Get In Touch With Us
